Splint

Day Appliances

Day Positioned Orthotic

Day Positioned Orthotic (MORA)
This device is constructed with posterior coverage (no incisal coverage), lingual apron major connector with wire reinforcement, maxillary palatal cusps contact central grooves of appliance (semi-anatomical Lingalized Occlusion).
  • Moderate occlusal indexing approximately 3mm deep
  • No buccal Cusp contact
  • Made with up to 8 ball clasps
  • Options:
    • Deep indexing
    • Light indexing
    • Accu-Liner mounting
  • Quick Turn around: Ships within 7 days
Material options: Acrylic

Full Coverage

This device is constructed with incisal coverage, maxillary palatal cusps contact central grooves of appliance (semi-anatomical Lingualized Occlusion).
  • Moderate occlusal indexing approximately 3mm deep
  • No buccal Cusp contact
  • Made with up to 8 ball clasps
  • Options:
    • Deep Indexing
    • Light Indexing
    • Anatomical Occlusion with Anterior Guidance and Cuspid Rise
    • Acculiner Mounting
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA or Acrylic

Thermoformed

This thin device is a variation of a full coverage Day Appliance is made from thermoformed material that is layered with acrylic on the occlusal surface and contains no metal. Maxillary palatal cusps contact central grooves of appliance (semi-anatomical Lingualized Occlusion).
  • Moderate occlusal indexing approximately 3mm deep
  • No buccal Cusp contact
  • Optional Accu-Liner mounting
  • Quick Turn around: Ships within 7 days
Material options: Thermoform

Hard Pivot

A mandibular orthopedic repositioning appliance(MORA). Typically made to Clinician’s treatment position. Designed to allow contact of the maxillary 1st molars. Posterior coverage (no incisal coverage), lingual apron major connector with wire reinforcement. Made with up to 8 ball clasps. There is a 10mm square step (pivot) built to contact the mesio-palatal cusps maxillary first molars. All other teeth are 1.5-2mm out of Occlusion. It’s purpose is to increase joint space, decompress the jaw joint and help increase mandibular range of motion.
  • Optional Accu-Liner mounting
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA (Full coverage recommended), Acrylic, Thermoform

Anti-Clenching

Designed to fit on the palate, this appliance has a bite plane(discluder) that allows contact of only the lower anterior teeth. Similar to a deprogrammer but designed to be used during the day or night, it allows only contact of anterior teeth.
  • Quick Turn around: Ships within 7 days
Material options: Acrylic and Thermoform

Night Appliances

Anterior Deprogrammer

Full arch appliance with a discluding element that allows only contact of 4 lower incisors (no posterior contact).
  • Discluding element is 15mm x 15mm.
  • Posterior teeth approximately 2mm out of contact.
  • Options:
    • K9 to K9 discluder
    • Narrow Discluder (5mm)
    • Coverage of less teeth
    • no metal
    • Accu-Liner mounting
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA, Milled Acetal, Acrylic, Thermoform, True Comfort

MIRA

Mandibular Incisor reducing appliance. Full arch upper and lower appliances that contact to only in the K9 areas. Functions as a deprogrammer.
  • The upper arch designed as a full arch appliance with a discluder (flat platform) from K9-K9.
  • The lower arch is also a full arch appliance with rounded stops in the K9 areas that contact the upper platform.
  • All but the K9s are out of occlusion by about 2mm
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA, Milled Acetal, Acrylic, Thermoform, True Comfort

Farrar

Farrar (Aka Deprogrammer with ramp)
A mandibular orthopedic repositioning appliance (MORA). Designed with a repositioning ramp the guides the mandible into a specific treatment position as established by clinician. It has a discluding element to allow only contact with lower anterior teeth (no posterior contact).
  • Full coverage appliance with 2 Ball clasps on each side.
  • Discluding element is 15mm wide.
  • Width of the ramp extends from middle of K9 to middle of K9 of lower arch and approximately 10mm long.
  • Posterior teeth approximately 2mm out of contact.
  • Options:
    • Hole in ramp
    • less teeth covered
    • K9 to K9 discluder
    • Narrow (5mm) discluder
    • No clasps (metal free)
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA, Milled Acetal, Acrylic, Thermoform, True Comfort

Night with ramp

A mandibular orthopedic repositioning appliance (MORA). Designed with a repositioning ramp the guides the mandible into a specific treatment position as established by clinician. Similar design to a Farrar except with full occlusal contact of opposing dentition.
  • Full coverage appliance with 2 Ball clasps on each side.
  • Full occlusal contact.
  • The width of the ramp extends from middle of K9 to middle of K9 of lower arch and approximately 10mm long.
  • Options:
    • Hole in ramp
    • less teeth covered
    • Light indexing 1mm
    • Moderate indexing 2-3mm
    • Deep indexing 3-5mm
    • No clasps (metal free)
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA, Milled Acetal, Acrylic, Thermoform, True Comfort

Flat Plane Splint

The Flat Plane Splint has been a long-time staple in dentistry. The standard design is full coverage with all opposing dentition in contact. It is a very versatile appliance design. It can be worn during day of night. It can be modified with Occlusal indexing to reposition the mandible or given anterior guidance.
  • Full coverage appliance with full occlusal contact and no anterior guidance and no cuspid rise.
  • Smooth occlusal surfaces
  • 2 ball clasps each side
  • Quick Turn around: Ships within 7 days
Material options: Milled PMMA, Milled Acetal, Acrylic, Thermoform, True Comfort

True Splints are a great solution for assisting your patients in managing oral pain.

Whether your goal is to prepare a patient for FMR, treat a pain patient, or protect a patient from teeth grinding, we can help.

True Function Laboratory can fabricate just about any inter-occlusal appliance design. If you have a specific design preference, we can customize it to your needs.